Our floating alcove shelving is a simple and elegant way to utilise alcove spaces and create storage and display space.
This is a bespoke product, each shelf is supplied cut-to-size to fit your alcoves’ unique angles and dimensions.
All of our shelves come with a fitting kit and easy-to-follow fitting instructions.
Each shelf comes complete with two side-mounted brackets and all the fixings that you will require.
Length: Various sizes
Wood Type: Solid pine
Finish: Various colours of varnish and 1 unvarnished option
Suitable for: Solid brick masonry wall types
Fixings: alcove shelf brackets made from heavy-duty 4 x 4cm angle raw steel.
Holding Weight: Up to 10kg
Supplied with pre-drilled holes brackets and fixings for a solid wall fitting.
**Please see our measuring tips below as on multiple shelves orders each shelf may need to vary in size.
MEASURING TIPS BELOW
As alcoves aren't always perfectly square and uniformed, we would suggest measuring both where the back of the shelf would sit, and where the front of the shelf would sit when calculating the length of the shelf you require.
Then you should use the smaller of the two measurements to ensure the shelf will fit correctly.
We would also suggest deducting 3-4mm from this length to allow a slight gap on either side.
If you are ordering multiple shelves, we would also recommend measuring the length of the alcove at each height in case the alcove widens or narrows at any point.
Please state in the notes, the length that you require and order to the nearest 10cm by rounding up. For example, if you need a shelf 93cm, please order it as 100cm and add to the notes that you need it 93cm.
Shelves are made from reclaimed scaffold boards which have been sanded and are available in different finishes and sizes. Each piece of timber is hand-cut, sanded and treated for every order. In this process we do not remove any of the timber’s natural markings, giving each piece a unique style every time.
Wood is a natural product and can differ in terms of cracks, grain and other distinguishing features. Any movement such as shrinkage, swelling, twisting and further cracking can be expected which adds to the natural characteristics. These are not defects and therefore are not covered by the lifetime guarantee.
However, as we handmade everything to order, we can also offer a variation in height, length or width to suit your personal requirements, please message us if your preferred size is not listed.
Please do not hesitate to contact us if you have any questions.
We cannot take any responsibility for any incorrect installations or damage caused during the installation process. Returns are not accepted for items that have been installed.
For shelves with brackets into plasterboard dry walls please see the following product >
For powder-coated colourful brackets and fixings please see the following product >
Stuck on the choice to match your current furniture or just compare with each other wood finish? Let us help!
Or go to our Etsy shop here:
Free Delivery to UK Mainland.
**For the Scottish Highlands, Northern Ireland, Isle of Man, Isle of Wight and Channel Islands please contact us as additional costs might apply.
Please allow 1-3 working days delivery for the UK and up to 7 days delivery for Europe. If you are ordering from outside the UK, please leave a note with your telephone number so we can provide this to the courier company in case they need to contact you on the day of delivery.
1. *** We are unable to send anything over 150cm outside of the UK. If you order something larger than this, we will sadly have to refund you as we aren't able to courier this at the moment.
2. BUYERS ARE RESPONSIBLE FOR ANY CUSTOMS AND IMPORT TAXES THAT MAY APPLY
We do not collect any customs fees when sending packages. All customs fees, taxes, tariffs, duties, etc. that may be incurred from receiving our product will be at the discretion of your country’s tax regulations and PAID FOR BY THE BUYER. These fees are not charged by the UK, the fees are charged by your country and we have no control over these fees. By purchasing our products, you agree to pay these fees. If you fail to pay after your item is shipped, we will dedicate shipping fees from the refund.
3. WE WON’T BE RESPONSIBLE FOR DELAYS DUE TO CUSTOMS.
Thank you for supporting our small business! :)
5-7 business days
Buyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.
Just contact me within: 3 days of delivery
Ship items back to me within: 7 days of delivery
Buyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.
----- Product Variation -----
Please note most of our products are hand-made and/or have a unique finish, shape, colour, natural imperfections, texture and may vary from the picture you see on our website, and/or from one product to the other if you order more than one. Dimensions may also slightly vary.
By the very nature of both the materials we use, and the type of industrial furniture we are producing, our wood could contain all of the following characterful traits: (which are expected within each piece and for which we are unable to offer any kind of discount or refund)
- Bandsaw marks across the grain.
- Small ‘chip out’ marks from the planer
- Small machining marks
- Natural colour variation
Hopefully all of these attributes will add to the uniqueness of your piece, but should you want your piece to be reduced from this type of rustic character as much as possible, please make sure to specify a quote, or let us know that you need a surface extra flat/smooth etc so that we are able to quote accordingly.
We always endeavour to choose the best boards for orders, however there will still be small knots, varied wood grain and medullary rays, depending on the wood we have in stock.
Live Edge items are different every time and can have high levels of character. We fix any large natural cracks and large knots, however these won't be on every order.
We will not accept returns, make adjustments or alterations, or offer refunds due to issues arising from the customer's personal preference on wood grain, pattern, knots, medullary rays, colour variation or any other naturally occurring elements. Natural wood is varied and beautiful and the grain can even change in the same piece.
All wood species can react to exposure to sunlight, changes in temperature and humidity. We cannot be held responsible for changes in the wood due to environmental factors, once delivery has been made. All our wood is dried to a humidity of approx. 10% moisture. In very dry or hot settings this could decrease, leading to cracks/movement; likewise a very humid or wet environment could cause the wood to warp, and joints to separate. We make our furniture with wood movement in mind; however we can’t take responsibility should the piece react to the temperature or humidity of your own environment. Please see our Care Guide for more information.
Our furniture is not suitable for outdoor use, or use in and wet-rooms unless specified.
Across the our website, and in our communications with you, we describe the wood thickness. These thicknesses are to describe the finished board thickness. If you need a specific wood thickness you must let us know when ordering.
All our products can be made to measure to fit your space, however we do not guarantee mm precision unless we are specified to do so, and some hardware such as nuts and bolts may protrude - please allow for +/- 25mm on all dimensions. (Or about 5%). The tolerances are likely to mainly occur in the height and depth of the piece as we are using solid boards which can vary slightly in size depending on how much each particular board needs sanding.
If you require an exact size for your item, for fitting into an alcove for example, please make sure to specify that the measurement needs to be exact. We can’t take responsibility for an item which doesn’t fit or is too small if the measurement is under the 5% of tolerance.
Due to the nature of the finishes applied to our product, the final finishes may vary from photos online or samples we send out, but we will always do our best a get a match.
When working to customers' design specifications and drawings we will not be held fully responsible for issues with design, functionality, or stability/wood movement, unless a sample product is ordered or testing is paid for. We endeavour to insure any product ordered sent out is in full working order, and to our usual high standard, however if we do encounter unexpected design issues, or need to alter a customers' design we will charge accordingly.
We will not be held responsible for any damaged caused by customers making adjustments or amendments to their order, for example the fitting of their own legs to table tops etc.
We cannot be held responsible for customers preference to design elements that are not discussed or raised at the point of ordering, and will make educated assumptions based on the style of the product, and it’s functionality etc.
We recommend that items of shelving, cabinets and drawers should be fixed to a wall for safety. Please mention whilst ordering if you will require fixings, or holes drilling. Items of furniture left free standing are done so at the customer’s own risk.
In the circumstance that an item is to be fixed to a wall, floor, or similar, it is the customer’s responsibility to check the suitability of their property, wall type, etc. We will not be held responsible for damages caused to customer’s property in the process, or as a result, of the customer attaching their furniture to the wall, floor etc. We would recommend the customer always use an experienced tradesman.
Never climb or hang from your furniture.
Always place heavier items at the bottom of shelving and storage to avoid the piece becoming top heavy.
Please get in touch if you would like a design custom made or if you would like an existing product made to your specification. As everything we make is made to order there is no additional charges for custom orders.
We cannot be held responsible for design errors with manufacture of products designed or instructed by you the customer. Please ensure you have measured the space you wish to place the item accurately before design and ensure that floor / walls weights are not exceeded. If you are unsure of a product weight please ask us and we will give the most accurate information as possible before manufacture.
For made to measure items, a refund will only be available if the product arrives faulty and cannot be repaired or replaced.
If you place an order and wish to cancel it, please contact us. If your order has begun production, please be aware that once an order has been accepted by us, we cannot cancel it. Please read our returns policy which details how to return unwanted or unsuitable items for a refund.
* You may terminate the contract (return your order), but only after paying any additional delivery or collection fees and a 25% restocking fee. This is entirely at our discretion.
** On-sale/clearance items are non-returnable unless you decide to exchange them, in that case, you simply need to cover the cost of return and supply a new shipping label. That means no - 25% off since the customer is in charge of both costs.
1. *** We are unable to send anything over 150cm outside of the UK.
2. BUYERS ARE RESPONSIBLE FOR ANY CUSTOMS AND IMPORT TAXES THAT MAY APPLY
We do not collect any customs fees when sending packages. All customs fees, taxes, tariffs, duties, etc. that may be incurred from receiving our product will be at the discretion of your country’s tax regulations and PAID FOR BY THE BUYER. These fees are not charged by the UK, the fees are charged by your country and we have no control over these fees. By purchasing our products, you agree to pay these fees. If you fail to pay after your item is shipped, we will dedicate shipping fees from refund.
3. WE WON’T BE RESPONSIBLE FOR DELAYS DUE TO CUSTOMS.
Yes of course! Please get in touch.
All wood species can react to exposure to sunlight, changes in temperature and humidity. We cannot be held responsible for changes in the wood due to environmental factors, once delivery has been made. All our wood is dried to a humidity of approx 10% moisture. In very dry or hot settings this could decrease, leading to cracks/movement; likewise a very humid or wet environment could cause the wood to warp, and joints to separate. We make our furniture with wood movement in mind; however we can’t take responsibility should the piece react to the temperature or humidity of your own environment.
All of our items are constructed using Mild Steel and delivered to us by a local supplier. We cut, drill, clean & weld (and clean again!) every single component by hand.
Our raw steel items are left untreated, exposing their original rustic coloring, and giving an industrial aesthetic. This is easily maintained with a coating of WD40 every few months. If these get wet it may cause rusting, so please ensure the area surrounding the item stays clean and dry, as it can mark your flooring.
Yes absolutely, we can offer our metal in any RAL colour of choice. If you google RAL colours, you will be able to choose one that suits. To order this, there is an additional charge which varies depending on the product, please message us for an exact quote.
Yes we send out samples of our wood!
We do offer a matching service, where we try to get as close to your desired colour or finish as possible. Please message us with your requirements and we will do our best to assist you :)
Wood has natural characteristics such as, shrinkage, swelling, surface splitting and minor movement due to the change in temperature and humidity. This won’t affect the durability or lifespan of your furniture or shelving. Movement within the wood is completely normal & in most situations we feel this adds character to the product.
These natural movements are not structural defects, therefore are not covered in this guarantee.